James R. Johnson ** USAforging@gmail.com ** 940 6274529 ** 2955 CR 1370 Alvord, TX 76225

​Johnson Metalsmithing LLC   Follow me on Instagram: http://www.instagram.com/james_johnson_anyang_usa

WARNING

Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.

You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.

Do not under any circumstances operate the equipment without training, eye, ear, and body protection.  Do not make modifications to the equipment. 


Power Hammer and Press Prices are subject to change 


COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.


​​Anyang USA Power Hammer and Hydraulic Press  ​Since 1956

165 LB HS/ 75 KG Self Contained Power Hammer

Length                47"

Width               26.5"

Height                85"

Die height          37"

Die length       5.75"

​Die width             4"

Beats per min    205

Weight Lbs.     6030


Motor Specs

​Electrical input   3 phase

Voltage      220V

Speed/RPM     1160

Amperage     29.3

​Motor HP       10

Plug Nema code  L14-30P

​Standard Features:
Warranty:
Frame:  Lifetime from AFP 
Internal wearing parts: 5 year
Motor: 3 years from WEG
USA oil flow control valves
USA Electrical components (assembled and tested in my shop)
Key out design, heavier anvil mass, deeper throat
H13 dies with holes for bolt-on tooling
​WEG 10 hp three-phase motor 
​Motor Specs: 
W22 NEMA Premium Efficiency 10 HP 6P 254/6T 3Ph 230/460//380 V 60//50 Hz IC411 - TEFC - Foot-mounted | W22 | W22 | TEFC Cast Iron | General Purpose ODP/TEFC | AC Motors - NEMA | Electric Motors | WEG - Products

Cost $17,350

google-site-verification:google8572898ccf6a110a.html