Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.
You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.
Do not under any circumstances operate the equipment without training, eye, ear, and body protection. Do not make modifications to the equipment.
Power Hammer and Press Prices are subject to change
COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.
Anyang USA Power Hammer and Hydraulic Press Since 1956
Frame: Lifetime from AFP
Internal wearing parts: 5 year
Motor: 3 years from WEG
Key out design, heavier anvil mass, deeper throat
H13 dies with holes for bolt-on tooling
WEG 3 hp single phase motor W22 3 HP 4P 182/4T 1Ph 208-230/460 V 60 Hz IC411 - TEFC - Foot-mounted | W22 | W22 | TEFC Cast Iron | General Purpose ODP/TEFC | AC Motors - NEMA | Electric Motors | WEG - Products
Die height 37"
Die width 2"
Die length 2.75"
Beats per min. 250
Weight lbs. 1190
WEG high torque
Power input single phase
Motor HP 3
Plug Nema code 6-30P
33 LB HS/ 15 KG Self Contained Power Hammer