James R. Johnson ** USAforging@gmail.com ** 940 6274529 ** 2955 CR 1370 Alvord, TX 76225

​Johnson Metalsmithing LLC   Follow me on Instagram: http://www.instagram.com/james_johnson_anyang_usa

WARNING

Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.

You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.

Do not under any circumstances operate the equipment without training, eye, ear, and body protection.  Do not make modifications to the equipment. 


Power Hammer and Press Prices are subject to change 


COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.


​​Anyang USA Power Hammer and Hydraulic Press  ​Since 1956

Latest Podcast from the Blacksmithspub

Standard Feature:

Warranty:

Frame:  Lifetime from AFP

Internal wearing parts: 5 year

Motor: 3 years from WEG

Key out design, heavier anvil mass, deeper throat

H13 dies with holes for bolt-on tooling

​WEG 3 hp single phase motor   W22 3 HP 4P 182/4T 1Ph 208-230/460 V 60 Hz IC411 - TEFC - Foot-mounted | W22 | W22 | TEFC Cast Iron | General Purpose | AC Motors - NEMA | Electric Motors | WEG - Products


Cost $7,950


Hammer Specifications


Length                                   35"

Width                                     18"

Height                                    61"

​Die height                              37"

Die width                                 2"

​Die length                           2.75"

​Beats per min.              ​        250

Weight lbs.                         1190


​Motor specs.

​WEG high torque

​Power input               single phase

Voltage                                230V

​Speed/RPM                          1750

​Amperage                                14

​Motor HP                                    3

​Plug Nema code              L6-30P

34 LB HS/ 15.4 KG Self Contained Power Hammer

google-site-verification:google8572898ccf6a110a.html