Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.
You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.
Do not under any circumstances operate the equipment without training, eye, ear, and body protection. Do not make modifications to the equipment.
Power Hammer and Press Prices are subject to change
COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.
Anyang USA Power Hammer and Hydraulic Press Since 1956
Latest Podcast from the Blacksmithspub
264 LB HS/ 120 KG self contained power hammer
Note: for shop layout ask for foundation drawings. Motor is mounted to the side requiring more space.
Die height 37"
Die width 4.75"
Die length (bottom) 8"
Die length (top) 6"
Beats per minute 190
Weight Lbs. 7,480
Electric input 3 phase
Motor HP 20
Switching supplied by customer
Frame: Lifetime from AFP
Internal wearing parts: 5 year
Motor: 3 year from WEG
USA oil flow control valves
H13 dies with holes for bolt-on tooling
WEG 20 hp Three-phase motor
Motor Specs: W22 NEMA Premium Efficiency 20 HP 6P 284/6T 3Ph 230/460//380 V 60 Hz IC411 - TEFC - Foot-mounted | W22 | W22 | TEFC Cast Iron | General Purpose ODP/TEFC | AC Motors - NEMA | Electric Motors | WEG - Products
Cost $22,450 plus shipping from Tainjin CN to the closest port