James R. Johnson ** USAforging@gmail.com ** 940 6274529 ** 2955 CR 1370 Alvord, TX 76225

​Johnson Metalsmithing LLC   Follow me on Instagram: http://www.instagram.com/james_johnson_anyang_usa

WARNING

Please be warned. Using these products can be extremely dangerous and can cause serious bodily harm.

You as the purchaser of the product are acknowledging the risks involved and accept full responsibility for injury and damages related to its purchase and use. You are therefore releasing our company, employees, and representatives from any and all liability related to its use.

Do not under any circumstances operate the equipment without training, eye, ear, and body protection.  Do not make modifications to the equipment. 


Power Hammer and Press Prices are subject to change 


COPYRIGHT © 2010 ANYANG USA and JOHNSON METALSMITHING LLC - ALL RIGHTS RESERVED.


​​Anyang USA Power Hammer and Hydraulic Press  ​Since 1956

www.ironstudioltd.com​Warren Holzman has a large shop in Philadelphia and owns several power hammers including an Anyang 165

​Tongs forged by Michael Hickle on his new 165 HS hammer.  https://www.facebook.com/lynxtrailfarm/?ref=br_rs

https://www.facebook.com/Ziwa-Forge-158531600863868/?pnref=lhc  ​Dana Flanders, left the corporate world to become a blacksmith artist... Very creative and talented and owns a 33.  Check out his work.

https://rtidforged.com/​Robert Thomas Iron is located in Charleston SC.  Robert owns many different hammers including an Anyang 88.  Creative and well executed forge work.   

Mark Aspery is one of the most accomplished blacksmiths, author and teacher of blacksmithing techniques.  Mark owns a 33 that is over 10 years old and is getting a new 55 lb. Anyang.  Check out his video's  https://www.youtube.com/user/MarkAspery

​Mike Kleeves owns a 165 lb. Anyang to make hammers used to make panels for cars.  Check out the video and google Mike Kleeves to see his outstanding work on restoring rare auto's.  .

Chris Ploof's work is breathtaking.  His focus is Damascus and Mokume jewelry.  Chris has a 120 lb Anyang and is will soon have a new 50T press.  http://www.chrisploof.com/

Jakob Faram is a well known and respected talented teacher, Jeweler and blacksmiths with international training.  Jakob owns an Anyang 88 For more information here is his website: https://www.faramforge.us/

google-site-verification:google8572898ccf6a110a.html